LOCATED in TENNESSEE !
Every Ls harness will have a Fuel pump relay set up for a stock oem fuel pump, OBD2 Port will also be Installed. This also goes for the 8.1 Big Block.
All harness come with Dual fan relays. Pcm will trigger fan relays when engine reaches 190 Degrees. I supply two fan relays to operate the fans with 20 amp Fan Fuses included. These work great on small brushless fans.
I will remove all plugs and wires that are not needed. I clean it up ,test continuity and build the fuse block. I also cover it in all new High Temp Nylon Loom and Flame Tape.There is a 5 year warranty on all workmanship.
This relay is needed for electronic automatic transmissions, 4l60/4l80 with lock up torque convertor. When the brakes are pressed the torque convertor unlocks and the tranny down shifts. Most other rework services do not provide this relay. I take extra time to build this relay into the fuse block and provide a lead wire. This is one less headache for my customers. No need to buy a breakswitch with this relay!
I'll add a Tps and Iac sensor plugs for the DBC throttle body and delete all drive by wire plugs.
I'll attach the gas pedal plug directly to the harness. If you have this plug please ship with the harness. If not I'll take care of it.
Ill attach the Gas pedal plug to all harnesses that require it.
All Harness come Equipped with Dual 20 amp Fan relays!!!
If you are using a non-electronic transmission let me know, I will delete the auto tranny connectors and wires free of charge. Please do not send the battery cables. At this point we are only converting harness 1993-2014. I am not accepting v6 vortec , roadmaster lt1, caprice lt1 harness at this time. I am accepting Camaro lt1 f-body harness. Ship your stock harness to. -- Adam Warren 206 Cave road Clarksville TN 37043 -- Please include a note with your return shipping address and a description of the build .please include your email address if you would prefer me to send you a PayPal invoice when the job is complete.

($25.00 shipping)

All harness will come equipped with Dual 20 amp Fan relays and fuses. I install the obd2 ports on all harnesses. Currently its a 3 to 5 day turnaround.